Binder C 150 User Manual download pdf (Page 73)

C 150 (E2) 12/2012 page 73/90

17.1.2 Packing inside the unit, equipment

Packing element

Material

Disposal

Door protection

PE foam

Plastic recycling

Packing box equipment

Cardboard

Paper recycling

Insulating air cushion foil

PE foil

Plastic recycling

Paperboard

Cardboard

Paper recycling

Silica gel bag

Paper with silica gel

Do not open. Dispose of with

normal waste

Sensor packing

Cardboard

Paper recycling

PE foam

Plastic recycling

Bag for operating manuals

PE foil

Plastic recycling

If recycling is not possible, all packing parts can also be disposed of with normal waste.

17.2 Decommissioning

Turn off the main power switch (2) and disconnect the unit from the power supply (pull the power

plug).

Turn off the CO

supply. Remove the gas connection.

Let the inner chamber sufficiently cool down before removing any parts.

The water pan must not remain filled while the incubator is out of operation. Otherwise condensation

may occur on the inner surfaces, as well as in the injection and suction nozzle of the CO

sensor com-

partment. If condensation formation has occurred, drops of condensate would leak from the openings

of injection and suction nozzle of the CO

sensor. In this case, clean and dry the incubator running at

37 °C / 98.6 °F with doors open for at least one hour before loading it with samples. BINDER recom-

mends performing a hot air sterilization of the unit before commissioning.

Temporal decommissioning: See indications for appropriate storage, chap. 3.3.

Final decommissioning: Dispose of the unit as described in chap. 17.3 to 17.5.

When restarting the unit, please pay attention to the corresponding information in chap. 6.2.

17.3 Disposal of the unit in the Federal Republic of Germany

According to directive 2002/96/EC of the European Parliament and of the Council on waste electrical and

electronic equipment (WEEE), BINDER devices are classified as “monitoring and control instruments”

(category 9) only intended for professional use“. They must not be disposed of at public collecting points.

The CO

incubator C 150 bears the symbol for the marking of electrical and electronic

equipment manufactured / placed on the market in the EC after 13 August 2005. It must be

disposed of in separate collection according to the directive 2002/96/EC on waste electrical

and electronic equipment (WEEE) and German national law for electrical and electronic

equipment (Elektro- und Elektronikgerätegesetz, ElektroG). WEEE marking: crossed-out

wheeled bin with solid bar under. A significant part of the materials must be recycled in

order to protect the environment.

At the end of the device’s service life have the device disposed of according to the German national law

for electrical and electronic equipment (Elektro- und Elektronikgerätegesetz, ElektroG) from 23 March

2005, BGBl. I p. 762 or contact BINDER service who will organize taking back and disposal of the unit

according to the German national law for electrical and electronic equipment (Elektro- und El-

ektronikgerätegesetz, ElektroG) from 23 March 2005, BGBl. I p. 762.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 89 90

Comments to this Manuals

No comments

Binder C 150 User Manual Page 73

Comments to this Manuals

Related products and manuals for Equipment Binder C 150