Binder KT 53 User Manual download pdf (Page 91)

KT (E6) 09/2013 Page 91/135

Chamber status Actual chamber status, including operating mode, set-points etc.

Measurement values Measured data

Event list List of status information and errors (see chap. 15)

Time programs All stored time programs

Week programs All stored week programs

Configuration (Service only)

Adjustment Adjustment data

Program parameters (Service only)

System information

(Service only)

All

All data

If no USB device has been connected, the message “No USB device found” is displayed. It

disappears after inserting the USB stick or the plug of your USB drive into the USB port in the

instrument box.

This symbol on the controller display indicates that data are being transmitted via the USB port.

13.2 Importing data from USB drive

Insert the USB stick or the plug of your USB drive into the USB port in the instrument box.

To configure data import from USB media, go to Menu > Import/Export > Import from USB drive

Fixed value

08.03.2013 05:05:06

Submenu “Import from USB drive”.

Select the desired data

and press the operating button.

Data is read from the connected media.

..\ Import from USB drive

All time programs

All week programs

Configuration

Close Home

All time programs All stored time programs

All week programs All stored week programs

Configuration

(Service only)

Select the desired data type and press the operating button. Data will be imported from the connected

media.

If no USB device has been connected, the message “No USB device found” is displayed. It

disappears after inserting the USB stick or the plug of your USB drive into the USB port in the

instrument box.

This symbol on the controller display indicates that data are being transmitted via the USB port.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 134 135

No comments

Binder KT 53 User Manual Page 91