KT (E6) 09/2013 Page 126/135
Electrical connection data KT constructed acc. to UL requirements (for the USA and Canada)
Overvoltage category acc. to IEC 61010-1
Pollution degree acc. to IEC 61010-1
Unit fuse 5x20 mm 230V / middle-time-lag M
Additional temperature fuse
Class 1 (DIN 12880) internal
1) Lower values are valid up to an ambient temperature of max. 25 °C / 77°F.
2) to 98% of the set-point
3) Use these values for sizing air condition systems
*** Values not yet determined
All technical data is specified for unloaded units with standard equipment at an ambient temperature of
+25 °C / 77°F and a power supply voltage fluctuation of +/-10%. The temperature data is determined in
accordance to BINDER factory standard following DIN 12880, observing the recommended wall
clearances of 10 % of the height, width, and depth of the inner chamber. Technical data refers to 100%
fan speed.
All indications are average values, typical for units produced in series. We reserve the right to
change technical specifications at any time.
23.5 Equipment and Options
To operate the refrigerated incubator, use only original BINDER accessories or accessories /
components from third-party suppliers authorized by BINDER. The user is responsible for any
risk arising from using unauthorized accessories.
Multifunction program controller T4.12 with digital display
Overtemperature safety controller class 3.1 acc. to DIN 12880
Peltier refrigerating system
Additional shelf, stainless steel
Perforated shelf ,stainless steel
Perforated rack with additional fixation for shaker operation
Reinforced rack stainless steel with 1 set of rack lockings
Safety controller class 3.3 acc. to DIN 12880
Additional access ports 30 mm / 1.18 in, 50 mm / 1.97 in or 100 mm / 3.94 in, with silicone plug
Comments to this Manuals