KT (E6) 09/2013 Page 13/135
1.4 Type plate
The type plate is located on the left unit side, on the bottom, right side.
Figure 2: Type plate (example of KT 115 regular unit)
Indications of the type plate
Manufacturer: BINDER GmbH
Nominal temperature
IP type of protection 20 acc. to EN 60529
Temperature safety device acc. to standard DIN 12880
Temperature safety device, class 3.1
(Special application acc. to project no.)
Nominal voltage 200-240 V
±
Thermoelectric cooling Peltier
Peltier refrigerating technology
CE conformity marking
Electrical and electronic equipment manufactured / placed on
the market in the EC after 13 August 2005 and to be disposed of
in separate collection according to directive 2002/96/EC on
waste electrical and electronic equipment (WEEE).
The equipment is certified in the GOST R certification system of
GOSTSTANDARD Russia.
LABORATORY EQUIPMENT
43KM
(KT-UL only)
The equipment is certified by Underwriters Laboratories Inc.
according to standards CAN/CSA-C22.2 No. 61010-1, 2
nd
Edition, 2004-07 (Electrical Equipment for Measurement,
Control, and Laboratory Use; Part 1: General Requirements); UL
61010-1, 2
nd
Edition, 2005-07-22 (Electrical Equipment for
Measurement, Control, and Laboratory Use; Part 1: General
Requirements); IEC 61010-1:2010, 3
rd
Edition and IEC 61010-2-
10:2003 (Particular Requirements for Laboratory Equipment for
the heating of materials).
Enclosure protection
3,0 A
Class
US PATS 4585923 / 5222612 / 5309981
Project No.
5405194 / 5601143 / 5773287 / 6079403
D 78532 Tuttlingen / Germany
Tel. + 49 (0) 7462/ 2005-0
Internet: www.binder-world.com
KT 115 Serial No. 00-00000
Made in Germany
Comments to this Manuals