Binder BF 53 User Manual download pdf (Page 28)

BF (E1) 02/2015 page 28/51

6.4.5 Setting the interface mode and, if appropriate, the printer interval

1. Press down button for approx. 5 seconds.

The display alternately shows “unit” and the temperature unit:

2. Press again button

The display alternately shows “rASd” and the set-point gradient:

3. Press again button

The display alternately shows “Adr” and the unit address:

4. Press again button

The display alternately shows “tFCt” and the timer function:

5. Press again button

The display alternately shows “PFCt” and the actual setting of the interface mode:

6. Set the desired interface mode with buttons

Settings: Modbus = “0” printer = “1”

In case of temperature data acquisition by the communication software APT-COM™

(option, chap. 8.2) interface mode ”0” (Modbus) must be selected.

The setting is automatically adopted after 2 seconds.

If interface mode “1” (printer) has been selected, the printer interval for the automatic output can be set

in an additional menu step:

7. Press again button

The display alternately shows “Prt” and in the entry level the actual setting of the printer interval:

8. Set the desired value from 0 to 255 with buttons

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 50 51

No comments

Binder BF 53 User Manual Page 28