Binder C 150 User Manual download pdf (Page 5)

Quick Guide CO Incubator C 150 (E2)

BINDER GmbH

Postfach 102

78502 Tuttlingen

Do NOT introduce any combustible or explosive materials into this

device. Prevent the release of combustible mixtures of solvents

with air and dust.

Some parts of the device may become hot during the hot-air

sterilisation - Do NOT touch.

Rear connection panel

BINDER GmbH

10/2012 Art. No. 7001-0235

Lower

housing cover

Door handle

Controller RP1

Main power switch

Tel.: +49 (0) 7462 2005 0

Fax: +49 (0) 7462 2005 100

http://www.binder-world.com

E-mail: [email protected]

Service hotline: +49 (0) 7462 2005 555

Service fax: +49 (0) 74 62 2005 93 555

Service e-mail: [email protected]

11 12 13 14 15

(11) Power cable

(12) Miniature fuse

(13)

(14)

(15)

Connection socket for zero-voltage relay alarm contact

Quick acting closure socket for CO gas bottle

Ethernet interface (option)

GBGB

This quick guide does not replace the operating manual. Read the

operating manual carefully before taking this unit into operation and

familiarize yourself with all safety relevant information.

Connection and putting into operation

Please check the power supply before connecting the unit and before the first run. Compare the values

with the data given on the type plate (left side, lower front).

Connect the device to a power supply of the specified ratings.

Set the gas supply pressure of the gas bottle to 2.0 bar above ambient pressure. Connect the gas bottle at

the rear of the unit to the corresponding socket. Connection for hose DN 6. Use CO gas with a technical

grade of 99.5 percent.

The gas connections must be established by qualified personnel who are trained in

handling and familiar with the required safety measures.CO gas

CO gas

Do NOT exceed the indicated output pressure of 2.5 bar above the ambient

pressure. Before connection, check the output pressure at the pressure reducer of

the gas supply.

Observe the

relevant regulations for handling gas cylinders and .

If several units with different maximum values of gas admission pressure are connected to a common

supply net, use pressure reducers for those units with a lower maximum gas admission pressure.

Plug in the CO sensor without turning into the intended connection bushing in the upper part of the rear of

the inner chamber. Fill the water pan with distilled, sterilized water.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Binder C 150 User Manual Page 5

Comments to this Manuals

Related products and manuals for Equipment Binder C 150